As a leading ball valve manufacturer RAYS FLOW CONTROL has been producing industrial ball valves to the highest quality standards with ultra-modern manufacturing technology and astute materials sourcing.
Casted GGC Valves are suitable for parts with complex shapes and intricate internal cavities, and they possess good mechanical properties.
The Silenct Check Valve is a valve that automatically opens and closes the valve disc based on the flow of the medium itself, used to prevent the backflow of the medium. Belonging to an automatic valve, its main function is to prevent medium backflow, prevent pump and drive motor from reversing, and prevent the release of container medium. Check valves can also be used on pipelines to supply auxiliary systems where the pressure may rise above the system pressure.
Y-Type Check Valveis a type of valve used to prevent fluid backflow, named after its Y-shaped valve body. It allows fluid to flow in one direction, and when the fluid flows in the opposite direction, the valve automatically closes to prevent backflow.
The valve body is made of high-strength alloy steel or stainless steel, and is equipped with a precisely processed swing-type valve disc structure, enabling automatic control of the unidirectional flow of the medium. The optimized fluid dynamics design effectively reduces water hammer impact. The surface of the valve disc is clad with hard alloy to ensure reliable sealing under high-pressure and high-speed conditions. It is suitable for pipeline systems in industries such as petroleum, chemical engineering, and power.
The dual plate check valve features two semicircular, spring-loaded valve discs mounted on a central vertical pivot. When the valve opens, the force of the fluid and the spring act at the center of the disc, causing it to open from the base first. This design minimizes wear on the seal during opening, enhancing its durability. As the flow decreases, the discs slowly move back towards the seat due to the spring's force, ensuring a gradual closure. During backflow, the increased force on the discs leads to a faster closure, effectively reducing the risk of water hammer and hydraulic shocks. The spring’s force closes the top end of the disc first, preventing damage at the disc's base and prolonging the seal's lifespan.
It is mainly used in various systems such as petroleum, chemical, metallurgical, pharmaceutical, etc. to transport high viscosity media that solidify at room temperature. The insulation jacket of BJ45W DC jacket insulation globe valve is welded between the two flanges of the valve, and there are two connection ports for the insulation jacket on the side and bottom of the valve. DC insulation globe valve is particularly suitable for pipelines in the chemical and fertilizer industries, and the inclusion of steam in the jacket can prevent the crystallization of the medium. Insulated globe valves are widely used in various systems such as petroleum, chemical, metallurgical, pharmaceutical, etc.
The Bellows Seal Gate Valve is a high-performance valve designed to ensure sealing integrity and prevent medium leakage. It utilizes bellows seal technology to effectively block fluid leaks that could cause environmental pollution or safety hazards. This valve is suitable for use in steam, thermal oil systems, heat exchangers, and other high-temperature, high-pressure fluid control applications. Its compact structure and easy maintenance offer long-term reliable sealing performance.
The Comodity Cast Steel Gate Valve is mainly composed of valve body, valve cover, valve wedge, valve seat and valve stem. The two sealing surfaces are wedge-shaped gate valves. The purpose of the wedge is to improve the auxiliary seal load, to achieve both high medium pressure sealing and low medium pressure sealing. The valve body of the wedge valve is provided with a guide mechanism, which can prevent the gate from rotating when the gate is turned on or closed, ensuring that the seal of the gate on the valve seat is accurate accordingly. At the same time, the wedge valve does not rub with the valve seat before turning off, thereby reducing the wear of the cover and effectively extending the service life of the valve.
The globe valve is mainly composed of valve body, valve cover, valve disc, valve stem and valve stem nut. The handwheel applies a certain torque on the upper end of the valve stem, and passes the valve stem to the valve petals to move it along the valve stem axis to achieve full or full-closed motion. The force applied by the handwheel can be obsessed with the valve seat to reach the stagnation state. The two-valve petals are designed to enter the top of the medium from the cover of the valve petals. The force force of the medium is the same as the valve closure direction, so the torque of the valve closure is small; The petals, the medium enters the exit of the valve from the inside, and generates a small amount of balance of the pressure of the pressure on both ends of the valve inlet and export, thereby achieving the effect of reduced the valve opening torque. Therefore, globe valve(double disc) is mainly used in high pressure or large-caliber pipelines. At the same time, the globe valve does not rub with the valve seat before the valve is closed, thereby reducing the wear of the cover surface and effectively extending the service life of the valve.
The globe valve is mainly composed of valve body, valve cover, valve disc and valve stem. The handwheel applies a certain torque at the upper end of the valve stem. The valve stem is passed to the valve petals through the valve stem, so that it moves up and down along the valve stem axis to achieve fully turned on or fully closed movements. The force applied by the handwheel acts on the disc to hold it against the seat to seal. The single disc globe valve is designed to enter the medium by the valve disc sealing surface below, the medium force is opposite to the direction of valve closing, so the valve closing torque is large, so the single disc globe valve is mainly used in low pressure or small diameter pipelines. At the same time, the globe valve does not rub with the valve seat before the valve is closed, thereby reducing the wear of the cover surface and effectively extending the service life of the valve.
When the disc of the lift check valve slides along the vertical center line of the valve body and the medium flows forward, the disc is lifted by the fluid thrust and the medium passes smoothly; When the medium stops flowing or reverse flowing, the valve disc quickly closes under the action of its own gravity and the reverse thrust of the fluid to prevent the medium from flowing back. This valve is usually equipped with a guide sleeve to ensure that the disc remains smooth during lifting and accurately falls back onto the seat.
RAYS bellows sealed globe valve adopts international advanced technology and double sealing design. It has the characteristics of high-performance elastic metal bellows and extremely long expansion fatigue life. Pipe shut-off valves: improve the use of energy efficiency, increase the safety of production equipment, reduce maintenance costs & frequent maintenance, and also provide a clean & safe work environment. Bellows sealed globe valve are suitable for class 150~2500, working temperature -46°C~538°C pipeline. Using carbon steel, stainless steel and other different main materials can be suitable for various media. The optional drive devices are: hand wheel, electric, pneumatic, etc. Bellows sealed globe valves are suitable for pipelines under various working conditions in petroleum, chemical, pharmaceutical, fertilizer, electric power, and other industries.
RAYS cast steel check valves are designed and manufactured to provide maximum service life and dependability. All check valves meet the design requirements of American Petroleum Institute standard API600 & 6D.BS EN 13709 and generally conform to American Society of Mechanical Engineers standard ASME B16.34. Valves are available in a complete range of body/cover materials and trims.