● The valve body, made from high-quality materials, includes a ball test fitting and has its middle flane and neck bolted together.
● The valve seat has a single-piston effect for both upstream and downstream flow and features a Double Block and Bleed (DBB) function.
● Between the valve seat and the ball, there are three types of seals: a traditional soft seal, a triangular ring seal, and a hard seal.
● The valve stem includes safety features to prevent it from being ejected if operated improperly.
● The valve is equipped with devices to enhance fire safety and prevent static buildup.
● Emergency sealant injection ports are available for the valve seat seal and stem seal. These are used for repairs in case of leakage, and each port has a grease valve and a check valve.
● The valve has both drainage and venting ports. The drain valve is at the bottom for emptying and venting the cavity, and the vent valve is at the top for cleaning.
● This valve is compatible with various types of actuators, including manual, electric, and hydraulic.
● Valves with welded ends can have their materials adjusted to match the pipeline, ensuring proper welding. Sleeve extensions prevent interference with sealing during welding.
● Underground valves have extended stems to make above-ground operation possible, with accessible grease, drainage, and venting facilities. The stem height is customizable.
◎ Material: Carbon Steel, Stainless Steel, Alloy Steel
◎ Nominal Size: NPS 2" ~ 60", DN 50~1500
◎ Pressure Rate: Class 150~2500, PN 10~420
◎ Temperature Range: -60°C to +250°C
◎ Operator: Manual, Pneumatic, Electric, etc...
◎ Application range: Suitable for petroleum, chemical industry, metallurgy, light industry, power station, urban construction water supply, low temperature working conditions, and long-distance pipelines such as: oil, gas, and natural gas.
It is mainly used for storage and transportation of oil and gas in the chemical industry, metallurgy, paper making, food processing, shipbuilding and other industries, used to open or close, and with pneumatic and electrical devices can also achieve the long-distance operation, to ensure personal safety.
The dual-plate wafer check valve features two semicircular, spring-loaded valve discs mounted on a central vertical pivot. When the valve opens, the force of the fluid and the spring act at the center of the disc, causing it to open from the base first. This design minimizes wear on the seal during opening, enhancing its durability. As the flow decreases, the discs slowly move back towards the seat due to the spring's force, ensuring a gradual closure. During backflow, the increased force on the discs leads to a faster closure, effectively reducing the risk of water hammer and hydraulic shocks. The spring’s force closes the top end of the disc first, preventing damage at the disc's base and prolonging the seal's lifespan.
There is an oil groove between the valve body and the sealing surface of the pressure-balanced plug valve, and sealing grease can be injected into the valve seat through the oil nozzle at any time to improve the sealing performance. The material of the parts and the size of the flange can be reasonably selected according to the actual working conditions or user requirements to meet various engineering needs.