●Negligible Pressure Drop;
●Self – Relieving;
●Double Block and Bleed performances;
●Equalized Bore (as required/operated);
●Possibility of reverse acting and equalized bore for fail closed operation;
●Double seal upstream by piston effect, down-stream with floating obturator;
●Superior Seal Per formances (Bubble Tight);
●Suitable for all types of fluids (including abrasive fluids);
●Suitable for ESDV/BDV applications and Pig Traps;
●Extremely flexible actuation with or without stem ejection assistance;
●Robust Construction;
●Full In-Line maintainability;
●Fire Safe construction.
Material: Carbon Steel, Stainless Steel, Alloy Steel
Nominal Size: NPS 2"~60", DN 50~1500
Pressure Rate: Class 150~2500, PN 10~ 420
Temperature Range: -60°C~538°C
Operator: Manual, Pneumatic, Electric, etc...
Application range: tap water, sewage, construction, petroleum, chemical industry, food.
◎ Design Standard: ASME B16.34, GB/T 12234
◎ Pressure Temperature Rate: ASME B16.34, GB/T 12224
◎ Face to Face: ASME B16.10, GB/T 12221, EN558
◎ Flange Standard: ASME B16.5, ASME B16.47, GB/T 9113, JB/T 79, HG/T 20592, EN 1092, GOST 33259
◎ Butt Weld: ASME B16.25, GB/T 12224
◎ Pressure Test: API 598, API 6D, GB/T 13927, JB/T 9092, GOST 9544
Cryogenic Gate Valve is an opening and closing device used for fully opening and fully closing. The opening and closing component of ultra-low temperature gate valve is the gate, and the movement direction of the gate is perpendicular to the fluid direction. The gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. The gate valve has two sealing surfaces, and the most commonly used mode gate valve has two sealing surfaces that form a wedge shape, and the wedge angle varies with parameters.
The Side Entry Cryogenic Floating Ball Valve is specially designed for deep cryogenic media (such as LNG, liquid nitrogen, liquid oxygen, etc.) applications. It adopts a unique side-mounted structure to ensure stable operation in extreme low-temperature environments below -196°C~+150°C. The valve body is made of high-quality stainless steel or special alloy materials, combined with precise processing techniques, achieving zero leakage and long service life under ultra-low temperature conditions. It is widely used in liquefied natural gas, air separation equipment, chemical and energy fields, and is a reliable choice for fluid control in harsh conditions.
The Non-Rising Stem Gate Valve is also called the rotating stem gate valve. Stem and nut are arranged on the gate plate, handwheel rotation drive valve stem rotate to lift the gate, usually there is a trapezoidal thread at the bottom of the valve stem and the rotation movement is turned into a linear motion through the limit slot between the valve stem and the gate body and the gate body and the gate, that is, the operation torque is turned into operation thrust. When the valve is turned on, when the height of the gate is equal to the diameter of the valve 1: 1: 1, the channel of the fluid is completely unblocked, but at the run, this position cannot be monitored. In actual use, the vertex of the valve stem is used as a sign, that is, the position that is unmoved as its full opening position. The non-rising stem gate valve has the design characteristics of the ordinary wedge-type gate valve. The valve body has a guide mechanism, which can prevent the gate from rotating when the gate is turned on or closed, ensuring that the seal of the gate on the valve seat is accurate accordingly. At the same time, the wedge valve does not rub with the valve seat before turning off, thereby reducing the wear of the cover and effectively extending the service life of the valve.