◎Excellent sealing performance, using metal bellows as the key sealing component, with its lower end welded to the valve stem assembly and its upper end connected to the
Plate welding forms a metal barrier to prevent fluid medium leakage and achieve zero
leakage of the valve stem
◎The main components such as the valve body are made of forged steel with high structural strength, resulting in a more uniform structure, better density and strength integrity, and dimensional errors small, with better performance compared to castings, able to withstand higher pressure and temperature
◎ Easy and reliable operation
The dual guarantee of long service life with corrugated pipe sealing and packing sealing
reduces the risk of leakage and lowers the frequency of maintenance; Valve body and
◎The minimum wall thickness design of the valve cover meets the requirements of relevant standards, ensuring the strength and rigidity of the valve under harsh working conditions such as high temperature and high pressure
Main material: carbon steel, stainless steel, Taiwan gold steel
Nominal diameter: NPS1/4″~NPS3″ DN6~DN80
Pressure range: CL150 ~ CL2500 PN10~ PN420
Working temperature: -196°C~ +600°C
Operator: Manual
Application range: tap water, sewage, construction, petroleum, chemical industry, food, medicine, textile, electricity, shipbuilding, metallurgy, energy system, etc.
◎ Design Standard: API 602/API 598
◎ Pressure Temperature Rate: ASME B16.34,BS1560
◎ Face to Face: ASME B16.10, GB/T12221, the length of the riveted structure at the threaded end of the socket-welding connection shall be in accordance with the factory standards.
◎Connection standards：ASME B16.11、ASME B1.20.1、ASME B16.5、ASME B16.25
◎ Fire Safe: API6Fa
◎ Pressure test: API 602, API 598
The globe valve is mainly composed of valve body, valve cover, valve disc and valve stem. The handwheel applies a certain torque at the upper end of the valve stem. The valve stem is passed to the valve petals through the valve stem, so that it moves up and down along the valve stem axis to achieve fully turned on or fully closed movements. The force applied by the handwheel acts on the disc to hold it against the seat to seal. The single disc globe valve is designed to enter the medium by the valve disc sealing surface below, the medium force is opposite to the direction of valve closing, so the valve closing torque is large, so the single disc globe valve is mainly used in low pressure or small diameter pipelines. At the same time, the globe valve does not rub with the valve seat before the valve is closed, thereby reducing the wear of the cover surface and effectively extending the service life of the valve.
It is mainly used in various systems such as petroleum, chemical, metallurgical, pharmaceutical, etc. to transport high viscosity media that solidify at room temperature. The insulation jacket of BJ45W DC jacket insulation globe valve is welded between the two flanges of the valve, and there are two connection ports for the insulation jacket on the side and bottom of the valve. DC insulation globe valve is particularly suitable for pipelines in the chemical and fertilizer industries, and the inclusion of steam in the jacket can prevent the crystallization of the medium. Insulated globe valves are widely used in various systems such as petroleum, chemical, metallurgical, pharmaceutical, etc.
Expanding Slab Gate Valve is a type of slide valve that utilizes parallel gate plates as its closing mechanism. These plates are equipped with a spreading mechanism to enhance functionality. The force pressing the plates against the valve seat is regulated by the medium pressure acting on either a floating gate plate or a floating valve seat. In dual gate flat gate valves, the inter-plate spreading mechanism provides additional pressing force. This valve is designed with innovative features including low operating torque, rapid actuation, minimal vibration, extended operational life, and enhanced safety. It is mainly used for the isolation or venting of gases and liquids in pipeline systems.