Material: Carbon Steel,Stainless Steel,Alloy Steel Nominal Size: NIPS 2"~48",DN50~1200
Pressure Rate: Class 150-2500,PN 10-420 Temperature Range:-60℃~+538℃
Features Description: One-piece, wing-type streamlined channel, low fluid resistance, hard alloy sealing surface, flexible disc, quick closing with small closing impact force.
Application range: Suitable for pipelines in various working conditions such as petroleum, chemical, pharmaceutical, fertilizer, power industry, and low temperature.
◎ Design Standard: API 6D, AP1602,ASME B16.34,GB/T 12235,GB/T21387
◎ Pressure Temperature Rate: ASME B16.34,GB/T 12224
◎ Face to Face: ASME B16.10,GB/T 12221,EN558
◎ Flange Standard: ASME B16.5,ASME B16.47,GB/T 9113,JB/T79,HG/T 20592,EN 1092, GOST 33259
◎ Butt Weld:ASMEB16.25 GB/T12224
◎ Pressure Test: API598,API 6D,GB/T 13927,JB/T 9092, GOST 9544
The non-rising stem gate valve is also called the rotating stem gate valve. Stem and nut are arranged on the gate plate, handwheel rotation drive valve stem rotate to lift the gate, usually there is a trapezoidal thread at the bottom of the valve stem and the rotation movement is turned into a linear motion through the limit slot between the valve stem and the gate body and the gate body and the gate, that is, the operation torque is turned into operation thrust. When the valve is turned on, when the height of the gate is equal to the diameter of the valve 1: 1: 1, the channel of the fluid is completely unblocked, but at the run, this position cannot be monitored. In actual use, the vertex of the valve stem is used as a sign, that is, the position that is unmoved as its full opening position. The non-rising stem gate valve has the design characteristics of the ordinary wedge-type gate valve. The valve body has a guide mechanism, which can prevent the gate from rotating when the gate is turned on or closed, ensuring that the seal of the gate on the valve seat is accurate accordingly. At the same time, the wedge valve does not rub with the valve seat before turning off, thereby reducing the wear of the cover and effectively extending the service life of the valve.
The “Double Block and Bleed Isolation Philosophy” requires two in-line isolation valves and a bleed valve, used to drain or vent trapped fluid between the two closure elements in order to safely isolate safely the downstream pipe. This feature can be achieved with one single valves c/w a bleed port between the obturators.