The sealing surface of the valve disc and seat is surfacing with iron base alloy or Stelli cobalt base carbide, which has the characteristics of wear resistance, high temperature resistance, corrosion resistance, good abrasion resistance and long service life.
Material: Carbon Steel,Stainless Steel,Alloy Steel Nominal Size: NIPS
Nominal Size: NIPS 2"~24",DN50~600
Pressure Rate: CLASS150~420,PN10~420
Temperature Range: -60℃~+538℃
Application range: Suitable for pipelines in various working conditions such as petroleum, chemical, pharmaceutical, fertilizer, power industry, and low temperature.
◎ Design Standard: API 6D, AP1602,ASME B16.34,GB/T 12235
◎ Pressure Temperature Rate:ASME B16.34,GB/T12224
◎ Face to Face: ASME B16.10,GB/T 12221
◎ Flange Standard: ASME B16.5,GB/T 9113
◎ Butt Weld Standard: ASME B16.25,GB/T12224
◎ Fire Safe: API 607
◎ Pressure Test: API 598,GB/T13927
Oxygen Globe Valve are often used in physical and chemical experiments with gases such as oxygen, nitrogen, hydrogen, argon, etc. These gases are usually stored in dedicated high-pressure gases. When in use, the gas pressure is reduced to the required range for the experiment through a pressure reducing valve, and then finely adjusted through other control valves to input the gas into the system. The oxygen shut-off valve is a forced sealing valve, so when the valve is closed, pressure must be applied to the valve disc to force the sealing surface not to leak.
Cryogenic Gate Valve is an opening and closing device used for fully opening and fully closing. The opening and closing component of ultra-low temperature gate valve is the gate, and the movement direction of the gate is perpendicular to the fluid direction. The gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. The gate valve has two sealing surfaces, and the most commonly used mode gate valve has two sealing surfaces that form a wedge shape, and the wedge angle varies with parameters.
There is an oil groove between the valve body and the sealing surface of the pressure-balanced plug valve, and sealing grease can be injected into the valve seat through the oil nozzle at any time to improve the sealing performance. The material of the parts and the size of the flange can be reasonably selected according to the actual working conditions or user requirements to meet various engineering needs.